IBM LTO ULTRIUM 3 H DRIVER DOWNLOAD

0 Comments

Add skew check during cartridge initialization and reject write operation if skew is large When the response of LUN1 command is returned, the code, incorrectly, reset the ILI sense existing flag Need to have TA accessible when library door is open When ECC is severely stressed an invalid C2 correction could occur resulting in a read permanent error MTR Failure when between lock and mount position Added support for new Persistent Reserve functions: Intermittent FSC 2E13 resulting from multiple unload commands received by the drive Drive panic after command sequence read 0, verify 0, then locate command Improve servo algorithm to decrease back EMF from reel motors LUN1: A parameter, byte 14h, is treated as reserved incorrectly, resulting in command being rejected The Following mode page data is not set to the default value after SCSI Reset: None of the above, continue with my search. This means that you can load WORM-capable firmware on your Ultrium 3 and newer tape drives and use any media that are supported by these drives. Move medium timeout due to bus hang condition. Document information More support for:

Uploader: Milmaran
Date Added: 1 October 2006
File Size: 63.87 Mb
Operating Systems: Windows NT/2000/XP/2003/2003/7/8/10 MacOS 10/X
Downloads: 59095
Price: Free* [*Free Regsitration Required]

An Ultrium 3 write-once-read-many WORM -capable drive can be identified by the level of code it contains.

The drive will not unload an invalid cartridge ultriium Not Applicable Operating system s: Mixing media in drives. Added a function which will indicate that the VPD was successfully updated after the library set Mode Page 0Eh and sub page This means that you can load WORM-capable firmware on your Ultrium 3 and newer tape drives and use any media that are supported by these drives.

  1236USB 2.15 DRIVER

Ultrium 4 and later tape drives are encryption capable, which means they can convert data into a cipher that ensures data security. Fixes problem with slow performance on a Space File Mark command due to the firmware selecting the wrong FM region.

LTO Ultrium tape drives

WWNN changed when 64D0 firmware was loaded: Persistent Reserve Out command rejected: LTO bar code label. Fibre channel reset pc. Drive getting wrong write pass value after recovered servo error.

Check here to start a new keyword search. You can identify all Ultrium 2 and later Ultrium tape drives by the logo at the front of the drive or by the label at the rear of the drive’s canister.

LTO Ultrium tape drives

Below are the generations of LTO Ultrium drives: A parameter, byte 14h, is treated as reserved incorrectly, resulting in command being rejected The Following mode page data is not set to the default value after SCSI Reset: Add skew check during cartridge initialization and reject write operation if skew is large When the response of LUN1 command is returned, the code, incorrectly, reset the ILI sense existing flag Need to have TA accessible when library door is open When ECC is severely stressed an invalid C2 correction could occur resulting in a read permanent error MTR Failure when between lock and mount position Added support for new Persistent Reserve functions: Contact and feedback Need support?

Drive fails to increment frame number during ADI error recovery correctly. Ultrium tape drives do not read from or write to tape cartridges, and tape drives do not read or write to Ultrium tape cartridges.

Interface will return a check condition where the First Attribute Id in the Read Attribute command does not exist or is not supported.

  HP D1688 DRIVER

IBM LTO Ultrium 3-H 23R /GB SAS Internal – Datland Technologies, Inc.

Relevel of Fibre Channel code to pick up numerous fixes. Cartridge is unexpectedly ejected: To enhance library performance, Ultrium 2 and newer Ultrium tape drives include speed matching, channel calibration, and power management. For an alternative solution, IBM provides a key manager that works in conjunction with the keystore of your choice to perform all necessary ubm management tasks.

These firmware updates are intended to, among other things, increase overall reliability, improve tape handling, further reduce any possibility of data errors, and provide continued enhancements to diagnostic capabilities. In order to support Ultrium 5 and later tape drives, all node cards in the library must be model xx3-equivalent lt cards.

IBM LTO Ultrium 3h Internal Tape Drive

To perform encryption, the drive must be encryption enabled by your selection of one of three methods of encryption management. None of the above, continue with my search. Document information More support for: Exception on allocate buffer. Watson Product Search Search. Command hang after Load-Load-Unload sequence Incorrect truncation of cartridge Serial Number in engineering log “When the library issues the new Get Behavior LDI command, the baud rate immediately after power will be 0 instead of the current baud rate.

Check on new hardware Improved tape handling after error: